GE 5 R + TB-L + SH

Giraffe® wall and ceiling sander

Technical data
Power consumption500 W
Power output270 W
Voltage230 V
Frequency50/60 Hz
Backing pad diameter225 mm
No-load speed1100 - 1650 rpm
Head angle of inclination100 °
Tool holder, wall and ceiling sanderhook and loop
Cable length5.0 m
Length1520 mm
Weight3.9 kg


  • Very handy, light-weight machine with optimum ease of operation. Provides comfortable and ergonomic working conditions
  • Revolving edge segment enables the processing of wall/wall and wall/ceiling surface transitions
  • The edge segment rotates by the movement of the machine without any interruption in work
  • Easy guiding: by optimal balance between motor and sanding head
  • Reliable force transmission and high flexibility thanks to the flexible drive shaft from. For decades established “FLEX technology”. Thanks to this design principle the weight on the head of the Giraffe is reduced to a minimum. This facilitates handling.
  • Electronic: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
  • Effective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environment
  • Option of connecting the FLEX safety vacuum cleaners to the FLEX clip-system on the guide tube
  • Easy handling thanks to ergonomically shaped guide tube made of aluminium. Optionally an auxiliary handle (accessory) can be attached
  • Dust-proof on/off switch
  • Very flexible thanks to an optional 500 mm extension (accessory) for high rooms, can be attached without any tools
  • According to the assortment of sanding paper ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting, polishing
  • Very large areas and rooms up to 3.40 m in height can be processed thanks to the optional application of the GM 340
  • The innovative, textile transport system allows the machine and accessories to be transported effortlessly. The Giraffe® does not have to be mounted and is immediately ready for use
  • Gimbal-mounted sanding head provides high flexibility and optimum adjustment for sanding walls and ceilings.

Matching accessories

  • 8 Versions
    Sandingpaper Xtreme Plus
  • GV 50
  • HZ-S G
    Auxiliary handle
  • SAD-FC 32
    Fast clip adapter
  • 4 Versions
    Diamond sanding pad
  • TBE-T/B GE5/7/18
    Insert carrying case head/handle retainer
  • SAD-C D36/27 AS/NL
    Clip adapter
  • D225 SU-S 320 VE5
    Superfinishing pad
  • D225 GT-K80 VE25
    Hook-and-loop sanding grid
  • D225 SC-A100 VE10
    Hook-and-loop sanding fleece
  • D225 GT-K100 VE25
    Hook-and-loop sanding grid
  • D225 SU-S 1200 VE5
    Superfinishing pad
  • IP D225-10 VE2
    Interface Ø 225, round
  • KAD D225/16 S
    Padded adapter for hook-and-loop paper
  • KAD D225/16 H
    Padded adapter for hook-and-loop paper
  • KAD D225/16 Set
    Hook-and-loop backing pad Ø 225, round
  • D225 SC-A180 VE10
    Hook-and-loop sanding fleece
  • SH-FC 32
    Clip-on quick clamping ring red
  • SH-C 32x4m AS/NL
    Antistatic suction hose with auxiliary air control
  • TB-L 1560x320x360
    Carrying bag
  • VCE-GE Fix
    Giraffe holder
  • 9 Versions
    Sandpaper, wall/ceiling Xtreme
  • 3 Versions
    Sanding paper ZIRCOFLEX Xtreme

Our FLEXperts are there for you.


Your local dealer