GE 7 + MH-T

Giraffe® wall and ceiling sander with interchangeable head system

Technical data
Power consumption710 W
Power output410 W
Voltage230 V
Frequency50/60Hz Hz
Backing pad diameter225 mm
No-load speed1100 - 1650 1 rpm
Stroke rate at no-load MH-T3800 - 5700 1 rpm
Stroke rate at no-load MH-X3100 - 4600 1 rpm
Head angle of inclination100 °
Tool holder, wall and ceiling sanderhook and loop
Cable length5.0 m
Length1520 mm
Weight4.2 kg

Advantages

  • Very handy, light-weight machine with optimum ease of operation. Provides comfortable and ergonomic working conditions
  • Fitted with innovative interchangeable head system. Sanding heads are attached and removed with a click
  • Triangular sanding head with a 4 mm stroke, ideal for sanding corners and edges. The orbital movement guides the abrasive directly up to the edge. The rotation follows the movement of the tool, without interruption of work
Interchangeable head systemABC
  • Reliable force transmission and high flexibility thanks to the flexible drive shaft from. For decades established “FLEX technology”. Thanks to this design principle the weight on the head of the Giraffe is reduced to a minimum. This facilitates handling.
  • Electronic: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
  • Easy guiding: by optimal balance between motor and sanding head
  • Effective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environment
  • Option of connecting the FLEX safety vacuum cleaners to the FLEX clip-system on the guide tube
  • Dust-proof on/off switch
  • Very flexible thanks to an optional 500 mm extension (accessory) for high rooms, can be attached without any tools
  • According to the assortment of sanding paper ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting
  • Very large areas and rooms up to 3.40 m in height can be processed thanks to the optional application of the GM 340
  • The innovative, textile transport system allows the machine and accessories to be transported effortlessly. The Giraffe® does not have to be mounted and is immediately ready for use
  • Gimbal-mounted sanding head provides high flexibility and optimum adjustment for sanding walls and ceilings.

Matching accessories

  • MH-R D225
    Rotary sanding head with edge segment
  • 8 Versions
    Hook-and-loop sanding paper (perforated)
  • MH-X D225
    Excentric sanding head
  • GV 50
    Extension
  • HZ-S G
    Auxiliary handle
  • 10 Versions
    Hook-and-loop sanding paper SELECTFLEX
  • GMA G
    Adapter
  • SAD-FC 32
    Fast clip adapter
  • MH-O D225
    Round sanding head
  • SH-C 32x4m AS/NL
    Antistatic suction hose with auxiliary air control
  • SAD-C D36/27 AS/NL
    Clip adapter
  • 4 Versions
    Diamond sanding pad
  • D225 GT-K80 VE25
    Hook-and-loop sanding grid
  • D225 GT-K100 VE25
    Hook-and-loop sanding grid
  • 10 Versions
    Hook-and-loop sanding paper SELECTFLEX
  • TBE-T/B GE5/7/18
    Insert carrying case head/handle retainer
  • IP D225-10 VE2
    Interface Ø 225, round
  • SP-T 290 x 290
    Hook-and-loop triangular backing pad
  • D225 SU-S 320 VE5
    Superfinishing pad
  • KAD D225/16 S
    Padded adapter for hook-and-loop paper
  • KAD D225/16 H
    Padded adapter for hook-and-loop paper
  • D225 SU-S 1200 VE5
    Superfinishing pad
  • KAD D225/16 Set
    Hook-and-loop backing pad Ø 225, round
  • D225 SC-A100 VE10
    Hook-and-loop sanding fleece
  • D225 SC-A180 VE10
    Hook-and-loop sanding fleece
  • MH-T 290x290
    Triangular sanding head
  • SH-FC 32
    Clip-on quick clamping ring red
  • TB-L 1560x320x360
    Carrying bag

Our FLEXperts are there for you.

Contact

Your local dealer