Mixers

MXE 1602 + WR2 160

1600 watt 2-speed mixer with 3-level speed switch | Order no. 495.948

find dealer

Large, rugged 2-gear unit with optimum ratios for powerful torque and correct speed for different materials
Full-wave electronic control: with soft start, temperature monitoring, overload protection and accelerator switch - for a controlled run-up to the optimum mixing speed. Sustained power in all speed ranges
Comfortable 3-level switch can be reached from the grip position without interrupting work, protected by a rubber sleeve. Level 1: cleaning, level 2: stirring up, level 3: mixing
Rotary switch to set the optimum mixing speed. Speed 1: for highly viscous materials, speed 2: for medium and low viscosity materials
On/off switch with lock and protection at power interruption. Ideal for stationary operation in a mixing station
The flexible rubber sleeve over the on/off switch prevents the ingress of dirt. No malfunctions caused by jammed switches
Ergonomic handles on the drive unit: low weight, fatigue-free arm posture and upright body posture allow comfortable, ergonomic operation
Four corner guards with rubber buffer provide secure storage during transportation and offer protection against shocks and impacts at the building site
Protective cap above the motor housing guides the cooling air flow and prevents the ingress of splashing water
For mixed applications up to 90 kg
With mixing paddle WR2 for mixture: pasty to tough. Tile adhesive, grout, filler compound, adhesive, finished plaster, adhesive mortar, ...

zoom

Product data sheet Product data sheets with accessories

Specifications
Equipment
Downloads
Accessories

No load speed 1st gear 0-150/300/530 rpm
No load speed 2nd gear 0-200/400/780 rpm
Power input 1600 watt
Power output 925 watt
Tool fixture M 14
Clamping collar Ø 53 mm
Max. mixing paddle Ø 160 mm
Cable length 4,0 m
Size (W x L x H) 343 x 405 x 215 mm
Weight (without mixing paddle) 5,0 kg

Order No.
1 WR2 helix paddle 160x600 M14 369.004
1 open-ended wrench SW 22 439.975

Instruction manual MXE 1602 + WR2 160

Helix paddle WR2

Two clockwise helices for kneading and mixing tough to pasty materials. The mixer paddle screws itself down forcing the material upwards. Extremely versatile, can be used for: tile adhesive, grout, filler, finished plaster, adhesive mortar, filler compound, floor screed.

Paddle in mm Mix in kg QTY/PKG Order no.

160 Ø 20-40 1 369.004 go to product
Helix paddle WR3R

Three clockwise helices screw themselves into the material. This provides fast, intensive mixing of even the heaviest and toughest mixtures, with little effort. Also known as a mortar or tough mixture paddle. Ideal for: mortar, concrete, plaster, screed, plasterboard bonding compound, bitumen coating.

Paddle in mm Mix in kg QTY/PKG Order no.

160 Ø 30-60 1 369.020 go to product
Helix paddle WR3L

Three anticlockwise helices press down the mix in the container. Any deposited pigments, solids or fibres are forced upwards and evenly mixed. The mix does not splash. Ideal for liquid and creamy mix: paints, emulsion paints, gypsum plaster, casting compounds, fibrous materials.

Paddle in mm Mix in kg QTY/PKG Order no.

160 Ø 30-60 1 369.071 go to product
Disc paddle SR2

Two discs with counter-running angled blades create a dynamic flow in the mixing container. The blades on the discs force the material being mixed in opposing directions downwards or upwards. Ideal for mixing liquid to tough material: Paint, emulsion, paste, glue, jointing mortar.

Paddle in mm Mix in kg QTY/PKG Order no.

160 Ø 30-60 1 369.136 go to product
close all