LBE 125 18.0-EC/5.0 Set
| Order no. 499.323
- Electronic management system (EMS) protects the machine, extends the service life, and increases efficiency
- Brushless motor with greater efficiency and a longer service life
- Microprocessor control with soft start, restart protection after power failure, temperature monitoring, overload protection, CDC-electronic feedback control
- Battery voltage 18 V
- Battery capacity 2,5 / 5,0 Ah
- Max. disc diameter 125 mm
- No load speed 3500 / 4500 / 6500 / 9000 rpm
- Tool fixture M 14
- Weight without battery 1,85 kg
- Order No.
- 1 guard grinding 125 Ø 436.860
- 1 handle 450.774
- 1 pin wrench 100.110
- 1 clamping flange 335.282
- 1 clamping nut 100.080
- 2 batteries 5.0 Ah AP 18.0/5.0 445.894
- 1 charger CA 10.8/18.0 417.882
- 1 carrying case L-BOXX® 136 414.085
- 1 case insert 444.405
- Li-Ion rechargeable battery pack 18,0 V
Battery pack Li ion 18.0 V with integrated charge and discharge protection, battery charge indicator, dust and splash protection. Electronic management system (EMS) protects the battery pack, extends the service life, and increases efficiency.
Battery capacity Battery voltage Weight QTY/PKG Order no. 2,5 18,0 0,42 1 445.886 go to product 
Battery pack Li ion 18.0 V with integrated charge and discharge protection, battery charge indicator, dust and splash protection. Electronic management system (EMS) protects the battery pack, extends the service life, and increases efficiency.
Battery capacity Battery voltage Weight QTY/PKG Order no. 5,0 18,0 0,72 1 445.894 go to product - Rapid charger
For charging 10.8 and 18.0 V battery packs. With large-format LCD display for battery diagnostics and charge levels. Charging time 10,8 V approx. 40 min. for 2.5 Ah / 4.0 Ah and approx. 55 min. for 6.0 Ah batteries. Charging time 18 V: approx 40 min for 2.5 Ah and approx 45 min for 5.0 Ah. A special procedure charges 80% of the capacity after about 30 min. With integrated battery pack cooler and overheating, discharge, and overload protection.
QTY/PKG Order no. 1 417.882 go to product - Cutting guard
Cutting guard, suitable for L 8-11 125 / LE 9-11 125, L 125 18.0-EC, L 10-11 125, LB/LBE 17-11 125, L/LE 14-11 125.
Diameter in mm QTY/PKG Order no. 125 1 437.069 go to product - Dust extraction guard
Extraction hood kit for working with cutting discs for 125 mm angle grinders. Consisting of extractor and aluminium cover. Can be fitted to the existing guard without using any tools.
Diameter in mm QTY/PKG Order no. 125 1 445.479 go to product - Disc guard cover
For tool-free conversion of the existing guard for cutting work.
Diameter in mm QTY/PKG Order no. 125 1 446.041 go to product - Disc guard with removable edge segment
Enables the operator to work very close to edges at maximum extraction power. Hexagonal recess bolt for height adjustment allows quick adjustment of extraction hood to tool height. Please note: for working with the guard and a diamond grinding disc we recommend an angle grinder with at least 1400 watt. Only for angle grinder with a guard with latching mechanism.
Dimensions in mm QTY/PKG Order no. 125 Ø 1 452.572 go to product - Diamantjet - diamond cutting disc, standard, concrete
Fast, long-life universal cutting disc, suitable for concrete and stone
Dimensions in mm QTY/PKG Order no. 125 Ø x 22,2 1 349.046 go to product - Diamantjet - diamond cutting disc, premium, tile
Fast, long-life tile cutting disc with closed diamond segment. Suitable for cutting all tiles, marble, slate, granite and natural stone. Precision cutting and low-noise
Dimensions in mm QTY/PKG Order no. 125 Ø x 22,2 1 349.038 go to product - Flap disc for metal and stainless steel, cambered
Ideal for flap-grinding metals, stainless steel, alloyed and non-alloyed steel, light metals, non ferrous metals, construction steel, to smooth welds and cast iron. Removing welding spots and beads, processing welding seams, breaking and rounding edges. High material removal rate, guarantees effortless working without filling pores.
Dimensions in mm Grit QTY/PKG Order no. 125 Ø x 22,2 P 60 10 349.925 go to product 125 Ø x 22,2 P 80 10 349.933 go to product - SC-VL polishing flap wheel for metal and stainless steel, cambered
Polishing flap wheel for sanding, cleaning and finishing on stainless steel, steel, titanium alloys, light metals, non-ferrous metals and plastics. Remove any tarnish, flash rust, scale and scratches. Remove any tarnish, flash rust, scale and scratches. Preparing, grinding and polishing welds.
Dimensions in mm Grit QTY/PKG Order no. 125 Ø x 22,2 medium 5 358.606 go to product - Velcro backing M 14
Elastic backing pad with velcro cover up to 12.000 rpm.
Dimensions in mm QTY/PKG Order no. 125 Ø 1 231.983 go to product - Velcro pad, cushioned M 14
12 mm cell rubber for even pressure distribution for grinding, polishing or sealing cover up to 10.000 rpm. Not for LE 14-11 125/LBE 17-11 125.
Dimensions in mm QTY/PKG Order no. 125 Ø 1 350.737 go to product - Velcro sanding paper ZIRCOFLEX
Ideally suited for high removal rates and high load on wood and metal substrates. The support fabric is extremely tear-resistant and is characterised by high cost-effectiveness. Can be used with velcro pad max. Ø 125 mm.
Dimensions in mm Grit QTY/PKG Order no. 125 Ø A 40 25 393.185 go to product 125 Ø A 60 25 393.193 go to product 125 Ø A 80 25 393.207 go to product - Velcro sanding paper CERAFLEX
Ideal for sanding stainless steel surfaces and grinding weld seams. The support fabric is extremely tear-resistant. Low heat generation and longer service life ensure high cost-effectiveness. Can be used with velcro pad max. Ø 125 mm.
Dimensions in mm Grit QTY/PKG Order no. 125 Ø K 80 50 393.215 go to product 125 Ø K 120 50 393.223 go to product 125 Ø K 180 50 393.231 go to product - Battery powered heating jacket
Heated, high-quality soft shell jacket with comfortable fleece lining, various pockets, and detachable hood. Wind and water repellent material for high durability. Three heating zones for individual heating settings and quick heat function. 10,5/21 hours of heat at level 1, 9,5/19 hours at level 2, and 5/10 hours at level 3 (2,5/5,0 Ah 18,0 V). Suitable for 10,8 and 18,0 V lithium ion battery. Battery adapter with USB port for charging smartphones. Battery not included.
Size QTY/PKG Order no. M 1 417.998 go to product L 1 423.165 go to product XL 1 423.173 go to product XXL 1 423.181 go to product - LED worklamp
Powerful LED worklamp with 24 cold-white LEDs and integrated discharge protection. LED head can be swivelled through 320° and folded through 180°. Swivelling and lowerable hook for attaching the lamp and belt clip. Lighting duration: approx 20 hours with 2.5 Ah battery pack and approx 40 hours with 5.0 Ah battery pack. FLEX battery system: suitable for all 18 V battery packs. Delivery does not include battery.
QTY/PKG Order no. 1 417.955 go to product - Brush, steel wire 0,5 mm
- Brush, steel wire 0,3 mm
- FixTec quick clamp nut M 14
For tool-less disc change, suitable for discs from Ø 115-150 mm.
QTY/PKG Order no. 1 313.459 go to product - Carrying case L-BOXX®
The robust storage and transport system L-BOXX® made of impact-resistant plastic conveys tools, accessories and consumables easily and comfortably to the place of use. Elaborate inserts provide order and clarity, ergonomically shaped handles and additional moulded recesses for flexible and comfortable handling. The unbeatably simple connection and disconnection of the different L-BOXXes optimises combined transportation. Fits the TÜV-tested in-vehicle equipment system from Sortimo perfectly and without adapters. Load capacity per L-BOXX® up to 25 kg, combined transportation up to 40 kg, the cover can be loaded up to 100 kg. Splash-proof. Without insert, with additional front handle.
External dimensions L x W x H Internal dimensions L x W x H Weight QTY/PKG Order no. 442 x 357 x 151 378 x 311 x 107 2,2 1 414.085 go to product - Carrying bag
Practical carrying bag made from plastic-reinforced, tear-resistant textile material with a very wide opening. With large storage space for up to three tools as well as compartments for accessories such as batteries, charger etc. and five exterior pockets on the front. Fitted with rubber feet, lockable zip fastener, cushioned carrying strap and steel-reinforced handles.
Size (W x L x H) QTY/PKG Order no. 510 x 165 x 280 1 491.365 go to product - Power 55 R
Set consisting of a 10.8/18.0 V rapid charger and two 5.0 Ah 18.0 V battery packs.
QTY/PKG Order no. 1 491.349 go to product - Power 22 Q
Set consisting of a 18.0 V charger and two 2.5 Ah 18.0 V battery packs.
QTY/PKG Order no. 1 491.357 go to product - close all
