CS 60 WET
| Order no. 374.016













































- High-performance motor: extra powerful for stone cutting and joint milling
- Continuous cut depth setting from 0-60 mm, with rail guide up to 54 mm. In the mitre cut from 0-44 mm, with guide rail up to 38 mm
- Continuous angle adjustment for mitre cuts from 0-45°
- Power input 1400 watt
- Power output 840 watt
- No load speed 6200 rpm
- Diamond cutting disc Ø / arbor (inside Ø) 170 / 22,2 mm
- Cutting depth / with guide rail 60 / 54 mm
- Mitre cuttings 0-45 °
- Depth of cut - mitre cut 5-44 mm
- Depth of cut - mitre cut with guide rail 0-38 mm
- Cable length 4,0 m
- Size (W x L x H) 360 x 280 x 170 mm
- Weight 4,5 kg
- Order No.
- 1 diamond cutting disc with segmented cutting edge 347.515
- 1 wrench for saw blade change 359.343
- 1 parallel guide fence 350.613
- 1 carrying case L-BOXX® 238 414.093
- 1 case insert 436.771
- Diamond cutting disc
With segmented cutting edge, vibration-dampened. For granite, marble, sandstone, concrete.
Dimensions in mm QTY/PKG Order no. 170 Ø x 22,2 1 347.515 go to product With closed cutting edge for a clean wet-cut, suitable for tiles, marble plates and ceramics.
Dimensions in mm QTY/PKG Order no. 170 Ø x 22,2 1 367.214 go to product With turbo segments for a clean wet cut; suitable for tiles and fine stoneware of any thickness up to hardness 5, marble, slate, granite and natural stone.
QTY/PKG Dimensions in mm Order no. 1 170 Ø x 22,2 386.189 go to product - Guide rail GRS
Precise aluminium profile with anodized sliding coating and guide rib. Plugged rubber lip as contact edge at the marking, anti slip protection on the bottom. Connector 353.272 can be used to extend the guide rails as required.
Length in mm QTY/PKG Order no. 800 1 353.280 go to product Precise aluminium profile with anodized sliding coating and guide rib. Plugged rubber lip as contact edge at the marking, anti slip protection on the bottom. Connector 353.272 can be used to extend the guide rails as required.
Length in mm QTY/PKG Order no. 1600 1 359.351 go to product - Connector for guide rail GRS
Precise metal connector for connecting two guide rails GRS. When not in use, the connector can be parked in the guide rail with the included tool wrench SW 5 - screw driver.
QTY/PKG Order no. 1 353.272 go to product - Trolley L-BOXX®
Trolley for the L-BOXX®es made of plastic with 4 castors, two of which can be locked. Can be loaded up to 100 kg.
Dimensions in mm Weight QTY/PKG Order no. 646 x 492 x 182 3,8 1 419.400 go to product - Case insert
Matching insert for CS 60 WET for carry case L-BOXX® 238.
QTY/PKG Order no. 1 436.771 go to product - close all